Home > PLUMBING > KITCHEN & BATH > SHOWER & BATH REPAIR
Choose a sub category:
SHOWER HEADS SHOWER HEAD PARTS & ACCESS. TUB SPOUTS
TUB & SHOWER DRAINS/PARTS
Sort By:
1 2 3 ... 10
GASKET SHOWERHEAD 3 PACK      Oatey 43561 Snap-In Floor Drain GASKET TUB DRAIN CARTRIDGE
Rubber construction. 3/8? inner diameter, 3/4? outer diameter. Prevents leaks between shower arm and shower head. Includes three washers. Designed for drainage in areas where waterproofing membrane is not required.  Plastic Snap-In Drain can be solvent welded or inserted into Sch. 40 DWV pipe.  One piece design does not allow for removal of the cover. Rubber. For tip-toe style bathtub stoppers. 2-1/16" x 1" x 1/4".
Oatey 42042 Tile Rings COVER DRAIN CLIP SHOWER3-3/8IN Oatey 43565 Snap-In Floor Drain
4-1/4"  x 4-1/4" Stainless steel square tile ring. For use with the 151 Series Oatey drains. Designed to fit 3-3/8" shower drains. Designed for drainage in areas where waterproofing membrane is not required.  Plastic Snap-In Drain can be solvent welded or inserted into Sch. 40 DWV pipe.  One piece design does not allow for removal of the cover.
STRAINER TUB SNAP 2IN CHROME  Oatey 43569 Snap-In Floor Drain Danco 80001 Tub Spout Ring
Steel construction, 2" diameter. Grid-style. Designed for drainage in areas where waterproofing membrane is not required.  Plastic Snap-In Drain can be solvent welded or inserted into Sch. 40 DWV pipe.  One piece design does not allow for removal of the cover. Adds a decorative flair to a basic tub spout. Covers gaps and holes. 3-5/8" OD, 2-1/4" ID.
Screw-Tite 42358 Replacement Strainer Plumb Pak PP826-64 Strainer Dome Cover Danco 80002 Tub Spout Ring
For screw-on tile shower drains, 4" snap-in drains and 2" or 3" general purpose drains. Replacement for Oatey 42210, 42213, 42399, 42404, 42218, 42219, 43566, 43567, 43580, 43581, 43578, 43579. Bagged. Strainer dome cover with screw. Adds a decorative flair to a basic tub spout. Covers gaps and holes. 3-5/8" OD, 2-1/4" ID.
PLATE OVERFLOW 1-HOLE CHROME  STRAINER SHOWER 3-3/8IN CHROME Plumb Pak PP22612 Face Plate Screw
Round design with screw holes 2" center-to-center. Includes adapter to replace one or two hole plates. Screws included. Steel construction, use with 3-1/8" drains. Screws not included. Chrome plated face plate screws.
Plumb Pak Water Saver Economy Showerhead STRAINER TUB 2-15/16 BRSH NIC Plumb Pak Water Saver Economy Showerhead
Installs to standard 1/2" shower arms. 2.0 gpm flow rate. 2-15/16" diameter. Brushed nickel finish. Replaces Gerber no. 91-292. Adjustable Spray. Installs to standard 1/2" shower arm. 2.5 GPM flow rate.
DRAIN SHOWER STALL 2 FIP      FLANGE ARM SHOWER W/SCREW     FLANGE SHOWER ARM CHROME
Female threaded outlet, stainless steel grid, 3-1/2" flange diameter. Sized to slip over shower arm and has an adjustable set screw for a secure fit. Polished chrome finish. Metal construction. Fits 1/2" IPS connection. Set screw style.
Mintcraft B1140WH Shower Arms SHOWERHEAD M-HOME/RV CHROME   DIVERTER TUB SPOUT REPAIR KIT
Standard 1/2", Plastic. Overall length 7". Constructed of durable plastic. 1/2" IPS connection. 2.5 GPM. Includes lift knob, repairs diverters in most tub spouts. Complete kit.
Plumb Pak PP825-50 Shower Drain Grid VALVE SHOWER CONTROL CHROME   BASKET SHOWER HAIR CATCHER
3-5/16" O.D. 6.88" h x 4-3/4" w. Brass construction, fits standard 1/2? IPS connection, small trickle of water reminds user to shut water off at shower handle when done. For use between shower arm and head. Durable plastic construction. Designed to fit the Danco hair catcher for shower drains (Model #?s: 10533, 10529). Stops hair and other particles from going down the drain
HOSE SHOWER REPLMNT WHITE 60IN Oatey 42787 Shower Drain World Wide Sourcing 24500 Bathtub Spouts
2" PVC offset shower drain with receptor base. Solvent welds over 2" schedule 40 DWV pipe. Universal 4-1/4" Snap-Tite strainer. Drain body provides 1-1/2" offset to work around joists and imperfect slab penetrations. Drain body is sealed to shower base with rubber gasket and fiber slip washer. Zinc body; chrome plated finish with reducer bushing. For 3/4'' or 1/2'' pipe.
   
 
1 2 3 ... 10