Home > ELECTRICAL > ROUGH ELECTRICAL > ELECTRICAL FITTINGS
Choose a sub category:
NON METALLIC CABLE CONNECTORS BX / FLEX CONDUIT FITTINGS EMT METAL CONDUIT FITTINGS
RIGID CONDUIT FITTINGS LIQUID TIGHT CONDUIT FITTINGS METAL CONDUIT ACCESSORIES
PVC CONDUIT FITTINGS SERVICE ENTRANCE FITTINGS GROUNDING RODS/CLAMPS
PLASTIC FLEXIBLE FITTINGS CONDUIT STRAPS WASHERS / REDUCERS
METAL CONDUIT SUPPORT
Sort By:
1 2 3 ... 19
Carlon E940D-CTN Standard Conduit Coupling Carlon E943D-CTN Terminal Adapter Halex 97521 Insulated Conduit Bushing
Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed. Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved.
Carlon E940E-CTN/CAR Standard Conduit Coupling Carlon E942DR-CTN Conduit Adapter Carlon E942ER-CTN Conduit Adapter
Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed. Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode. Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode.
Carlon E943E-CTN Terminal Adapter Carlon E940FR-CTN Standard Conduit Coupling Halex 97522 Insulated Conduit Bushing
Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance. Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved.
Carlon E943FR-CTN Terminal Adapter Halex 97525 Insulated Conduit Bushing Carlon Snap Strap E978DC-CAR 1-Hole Single Conduit Strap
Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. Safe, non-conductive. To be used in accordance with NEC, Article 347.8 conduit spacing requirements. For use with Schedule 40/80 non-metallic solvent weld fittings.
Carlon E996DR-CTN Conduit Box Adapter Carlon UA9ADB-CTN Standard Radius Rigid Conduit Elbow Carlon Snap Strap E978EC-CAR 1-Hole Single Conduit Strap
For PVC enclosures. cULus Listed. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Schedule 40. UL 651 Listed to the NEC by the ETL, UL Listed. Safe, non-conductive. To be used in accordance with NEC, Article 347.8 conduit spacing requirements. For use with Schedule 40/80 non-metallic solvent weld fittings.
Halex 90440 Screw-In Connector Carlon E940GR-CTN Standard Conduit Coupling Halex 96163 2-Hole Snap-On Conduit Strap
Zinc die cast. Use to connect flexible metallic conduit (Greenfield) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs. Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.
Halex 96191 Rigid IMC Conduit Locknut Carlon E996ER-CTN Conduit Box Adapter Carlon E942FR-CTN Conduit Adapter
Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. For PVC enclosures. cULus Listed. Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode.
Carlon UA9ADR-CTN Standard Radius Conduit Elbow Halex 96821 Rigid Reducing Conduit Washer Carlon E940HR-CTN Standard Conduit Coupling
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Use to reduce the size of the conduit hole knockout opening in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. UL Listed, CSA Approved. Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed.
Carlon E943GR-CTN Terminal Adapter Carlon UA7ADB-CTN Standard Radius Conduit Elbow Halex 97523 Insulated Conduit Bushing
Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved.
Halex 96831 Rigid Reducing Conduit Washer Halex 96832 Rigid Reducing Conduit Washer Carlon A240D-CAR 1-Piece Conduit Coupling
Use to reduce the size of the conduit hole knockout opening in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. UL Listed, CSA Approved. Use to reduce the size of the conduit hole knockout opening in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. UL Listed, CSA Approved. Quick connect, fold and snap together. No cement, set screws or lock nuts. For 600 volt use in ceilings, floors and walls in residential, commercial and industrial buildings not more than three floors above grade. Colored in brilliant electric blue. For indoor use. Concrete tight when used with Carlon ENT. UL Listed.
   
 
1 2 3 ... 19